Table of Contents
Advertisement
MIC Series 550
The table below identifies the number of alarm inputs and outputs available in MIC IR power
supply units. MIC IR PSUs do not have the option of a separate card for additional alarm
inputs or outputs.
MIC-IR-24PSU-UL,
MIC-IR-115PSU-UL,
MIC-IR-240PSU-UL
Table 12.4: Number of alarm inputs and outputs in MIC IR PSUs
12.5
Simultaneous IP and Analog Video/Control ("Hybrid"
Operation)
The figure below illustrates how to configure your system to achieve simultaneous video and
control over both IP and analog connections.
Figure 12.2: System configuration for simultaneous video/control
Number
1
2
3
4
5
Bosch Security Systems, Inc.
MIC PSU
Number of
Alarm Inputs
Description
Connection between MIC camera and BNC T-connector in BNC socket on PCB in
MIC IP PSU
Connection between BNC T-connector and encoder in MIC IP PSU
Connection between BNC T-connector and Bilinx-based control (head-end) system
Connection between Bilinx-based control (head-end) system and Local Area
Network (LAN) (or the "cloud")
Connection between the Local Area Network (LAN) and PC connected to video
monitor
Operation Manual
Number of
Alarm Outputs
4
0
Install the MIC (standard) PSU | en
2014.11 | 3.2 | F.01U.239.454
31
Advertisement
Table of Contents
