Data Setting And Programming Examples; Data Settings - Omron SYSMAC C200H-DA002 Operation Manual

Data Setting and Programming Examples

2-4

Data Setting and Programming Examples

2-4-1 Data Settings

Basic Settings
Item
Unit number 0 (allocated words: IR 100 to IR 109 and DM 1000 to DM 1043)
Inputs used Inputs 1 to 5 (The conversion prohibit bits for inputs 6 to 8 are turned ON.)
A/D BCD
conversion
data
Detailed Settings
Item
Input signal range
Scaling function Lower limit
Upper limit
Number of terms for mean
value calculation
Square root function
Limit warning Mode
function
Lower limit
Upper limit
DM Area Settings
DM word Contents
DM 1000 03E0
DM 1001 006A
DM 1002 0704
DM 1003 0102
DM 1004 1000
DM 1005 5000
DM 1006 1000
DM 1007 5000
DM 1008 0400
DM 1009 1000
DM 1022 0050
DM 1030 1200
DM 1031 4800
30
The following settings are used in this example.
Input 5 Input 4
–10 to +10 V 0 to +10 V
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Data in the DM area is set using a computer running SSS, a Programming Con-
sole, or other Peripheral Device.
After setting the data, turn the PC ON → OFF→ ON or turn AR 0100 (the Spe-
cial I/O Unit Restart Bit) OFF→ ON → OFF to initialize the Unit with the new set-
tings.
Limit warning mode (bit 09 = "1"), BCD (bit 08 = "1"), conversion prohibit (bits 05 to 07 = "1")
Input signal range setting (00 00 00 00 01 10 10 10)
Scaling function (bits 08 to 10 = "1"), mean value function (bit 02 = "1")
Square root function (bit 08 = "1"), limit warning function (bit 01 = "1")
Input 1 lower limit for scaling
Input 1 upper limit for scaling
Input 2 lower limit for scaling
Input 2 upper limit for scaling
Input 3 lower limit for scaling
Input 3 upper limit for scaling
Input 3 number of terms for mean value
Input 2 limit warning function: lower limit
Input 2 limit warning function: upper limit
Setting
Input 3
4 to 20 mA 1 to 5 V
0400 1000
1000 5000
50 ---
--- ---
--- 2
--- 1200
--- 4800
Data
Section 2-4
Input 2 Input 1
1 to 5 V
1000
5000
---
Yes
---
---
---