Supermicro X6DVL-EG2 User Manual page 86

X6DVL-EG2 User's Manual
To configure SATA RAID for Operating Systems that support RAID
functions(--Windows, Red Hat & SuSe, Linux)
1. Select "Advanced Setting" from the AMI BIOS menu.
2. Select the IDE Configuration menu.
3. Change the IDE Configuration to "P-ATA Only."
4. Under the item-"Configure S-ATA as RAID", select "Yes".
5. Tap the <Esc> key and scroll down to "Exit". Select "Save and Exit"
from the "Exit" menu. Press the <Enter> key to save the changes and exit
the BIOS.
6. Once you've exited the BIOS Utility, the system will re-boot.
7. During the system startup, press the <Ctrl> and the <A> keys simulta-
neously to run the Adaptec RAID Configuration Utility when prompted by
the following message:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
The Adaptec Embedded Serial ATA with HostRAID Con-
troller Driver
Adaptec's Embedded Serial ATA RAID with HostRAID controller adds RAID
functionality to the Serial ATA I/O controller by supporting RAID 0
(Striping) or RAID 1 (Mirroring) to enhance the industry's pioneer PCI-to-e
host controller products. RAID striping (RAID 0) can greatly improve hard
disk I/O performance because of its capability in striping data across
multiple drives. RAID mirroring (RAID 1) allows the data to be simulta-
neously written to two drives, so critical data is always available even if
a single hard disk fails. Due to the built-in functionality, the X6DVL-EG2 is
specially designed to keep pace with the increasing performance
demands of computer systems by improving disk I/O throughput and
providing data accessibility regardless of a single disk failure. By incorpo-
rating the Adaptec Embedded Serial ATA into the motherboard design,
Supermicro's X6DVL-EG2 offers the user with the benefits of SATARAID
without the high costs associated with hardware RAID applications.
(*Note: For Adaptec's RAID Driver Installation Instructions, please refer to
the Adaptec RAID Controller User's Guide: "Emb_SA_RAID_UG.pdf" in the
CD that came with this motherboard. You can also download a copy of
Adaptec's User's Guide from our web site at www.supermicro.com.)
C-2