Supermicro X6DVL-EG2 User Manual page 66

X6DVL-EG2 User's Manual
Memory Buffer Event Logging
This setting allows you to enable or disable Memory Buffer Event logging.
The options are Enabled or Disabled.
PCI Error Logging
This setting allows you to enable or disable PCI Error logging. The options
are Enabled or Disabled.
MPS Configuration
This section allows the user to configure the multi-processor table.
MPS Revision
This feature allows the user to select MPS Revision. The options are 1.1 or
1.4.
PCI Express Configuration
This section allows the user to configure PCI Express slots.
Active State Power Management
Select Enabled to activate the function of power management for signal
transactions between PCI Express L0 and L1 Link. The options are Enabled
and Disabled.
I/O Expander and Mode
This feature allows the user to set the IO Expand Mode for Hot Plug sup-
port. The options are PCA9555, Two PCA9554, One PCA9554 (Low), One
PCA9554 (High), Two PCA9554A, One PCA9554A (Low), and Two
PCA9554 (High).
PCI Express Compliance Mode
Select Enabled to enable MCH to activate PCI Express Compliance Mode.
The options are Disabled and Enabled.
Spread Spectrum
Select Enabled to enable Spread Spectrum to allow the system to monitor
and to attempt to reduce the ElectroMagnetic Interference level caused by
components in the system. The options are Disabled and Enabled.
4-14