Boot Settings Configuration - Supermicro X6DVL-EG2 User Manual

Fan Speed Control Modes:
This feature allows the user to decide how the system controls the speeds
of the onboard fans. If the option is set to "3-pin fan", the fan speed is
controlled based upon the CPU die temperature. When the CPU die tempera-
ture is higher, the fan speed will be higher as well. If the option is set to "4-
pin", the fan speed will be controlled by the Thermal Management Settings
pre-configured by the user at this feature. Select "3-pin" if your chassis
came with 3-pin fan headers. Select "4-pin" if your chassis came with 4-pin
fan headers. Select "Workstation" if your system is used as a Workstation.
Select "Server" if your system
disable the fan speed control function to allow the onboard fans to run at
the full speed (12V) at all time.
(Server), 3. 3-pin (Workstation), 4. 4-pin (Server), 5. 4-pin (Workstation).
Fan1 Speed to Fan6 Speed

4-4 Boot Settings Configuration

This item allows the user to configure the following boot settings for the
system:
Quick Boot
Select Enabled to allow the AMI BIOS to skip certain test during POST in
order to shorten the time needed for the system to bootup. The options are
Enabled and Disabled.
Quiet Boot
Set this value to allow the boot up screen options to be modified between
POST messages or the OEM logo. The default setting is Enabled. Select
Disabled to allow the computer system to display the POST messages. Se-
lect Enabled to allow the computer system to display the OEM logo.
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. The
default setting is Force BIOS. Select Force BIOS to allow the computer
system to force a third party BIOS to display during system boot.
Keep Current to allow the computer system to display the BIOS information
during system boot. The options are Force BIOS and Keep Current.
is used as a Server. Select "Disable" to
The Options are: 1. Disable,
4-17
Chapter 4: AMI BIOS
2. 3-pin
Select