Supermicro X6DVL-EG2 User Manual page 62

X6DVL-EG2 User's Manual
IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
This feature specifies the availability of an IRQ to be used by a PCI, PnP
device. Select Reserved for the IRQ to be used by a Legacy ISA device.
The options are: Available, Reserved.
DMA Channel 0/DMA Channel 1/DMA Channel 3/DMA Channel 5/
DMA Channel 6/DMA Channel 7
Select Available to indicate that a specific DMA channel is available to
be used by a PCI/PnP device. Select Reserved, if the DMA channel
specified is reserved for a Legacy ISA device.
Reserved Memory Size
This feature specifies the size of memory block to be reserved for Legacy
ISA devices. The options are: Disabled, 16K, 32K, 64K.
Super IO Configuration Sub Menu
Serial Port1 Address
This option specifies the base I/O port address and Interrupt Request ad-
dress of serial port 1. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the
serial port physically becomes unavailable. Select 3F8/IRQ4 to allow the
serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt
address. The options are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3.
Serial Port2 Address
This option specifies the base I/O port address and Interrupt Request ad-
dress of serial port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled , the
serial port physically becomes unavailable. Select 2F8/IRQ3 to allow the
serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt
address. The options are Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3.
4-10