Supermicro X6DVL-EG2 User Manual page 102

X6DVL-EG2 User's Manual
C-2 Installing Intel's Hance Rapids Driver by
Adaptec and the Windows OS
a. Insert Supermicro's bootable CD that came with the package into the CD
Drive during the system reboot, and the screen:"Super Micro Driver Diskette
Maker" will appear.
b. From the list displayed on the screen, choose the item: "Intel Hance
Rapids Driver by 3rd Party (Adaptec)" and press <ENTER>.
c. From the next screen displayed, choose the OS driver you want to install
and press <Enter>.
d. Insert a formatted diskette into drive A: and press <Enter> as prompted.
e. Exit the program after the process is completed. Then, reboot the system.
f. Insert Microsoft Windows OS Setup CD in the CD Driver, and the system
will start to boot up from CD.
g. Press the <F6> key when the message-"Press F6 if you need to install a
third party SCSI or RAID driver" displays.
h. When the Windows OS Setup screen appears, press "S" to specify
additional device(s).
i. Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller
Driver" into Drive A: and press the <Enter> key.
j. Choose the Adaptec Embedded Host Serial ATA Raid Controller from the
list indicated in the Windows OS Setup Screen, and press the <Enter> key.
k. Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all
devices are specified, press the <Enter> key to continue with the installa-
tion.
l. From the Windows OS Setup screen, press the <Enter> key. The OS
Setup will automatically load all device files, and, then, continue the Win-
dows OS installation.
m. After Windows OS Installation is completed, the system will automatically
reboot.
C-18