Power Configuration - Supermicro X6DVL-EG2 User Manual

Power Configuration

This feature allows the user to configure PnP settings.
Power Button Mode
This setting allows you to decide if the system will instantly power off or
will wait for 4 seconds before power-off when the power button is
pressed. The options are Instant off and 4 Seconds.
Restore on AC Power Loss
This setting allows you to decide how the system will react when power
returns after an unexpected power outage. The options are Power Off,
Power On and Last State.
Watch Dog Timer
This setting is used to enable or disabled the function of Watch Dog Timer.
It must be used in conjunction with the WD jumper (see Chapter 2 for
details). The options are Enabled and Disabled.
Event Log Configuration
Highlight this item and press <Enter> to view the contents of the event log.
View Event Log
This feature allows the user to view all unread events.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Logs
This setting will clear all event logs when set to OK. The options are OK
and Cancel.
ECC Event Logging
This setting allows you to enable or disable ECC Event logging. The options
are Enabled or Disabled.
Hub Interface Event Logging
This setting allows you to enable or disable Hub Interface Event logging.
The options are Enabled or Disabled.
System Bus Event Logging
This setting allows you to enable or disable System Bus Event logging. The
options are Enabled or Disabled.
4-13
Chapter 4: AMI BIOS