Supermicro X6DVL-EG2 User Manual page 26

X6DVL-EG2 User's Manual
Figure 2-2.
To Install:
Insert module
vertically and
press down until
it snaps into
place. Pay
attention to the
alignment notch
at the bottom.
To Remove:
Use your
thumbs to
gently push near
the edge of both
ends of the
module. This
should release it
from the slot.
2-4 I/OPorts/Control Panel Connectors
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 2-3 below for the colors and locations of the various I/O ports.
Figure 2-3.
Installing and Removing DIMMs
2
DDR2 Top View
I/O Port Locations and Definitions
2-6
1 2