Integrated Trailer Brake Controller - Troubleshooting - Ford SUPER DUTY 2024 Owner's Manual

Integrated Trailer Brake Controller
INTEGRATED TRAILER BRAKE CONTROLLER –
TROUBLESHOOTING
INTEGRATED TRAILER BRAKE CONTROLLER – INFORMATION
MESSAGES
Message
Trailer Connected
Trailer Disconnected
Trailer Wiring Fault
Trailer Brake Gain: {trailer gain value:#0.0}
Trailer Brake Gain: {trailer gain value:#0.0}
No Trailer
Trailer Battery Not Charging See Manual
Trailer Brake Module Fault
Trailer brake system fault See manual
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
The system detects a correct trailer
connection during a given ignition cycle.
The system detects the trailer wiring
connection is disconnected during a given
ignition cycle.
The system detects an electrical fault in
the trailer brake circuit. If this message
appears without a trailer attached, see your
authorized dealer. If a trailer is attached,
inspect and repair the trailer wiring.
Displays the current gain setting for the
trailer brake.
Displays the current gain setting for the
trailer brake when you do not have a trailer
connected.
The vehicle's battery voltage is low or there
is a fault with your trailer's battery. Your
trailer's battery voltage is below 8 volts or
it is connected in reverse polarity.
Perform a trailer brake and trailer light
check if possible. If the message persists,
have your vehicle checked as soon as
possible.
Verify the trailer brake connections are
secure and that the aftermarket trailer
brake controller device is correctly installed.
Perform a trailer brake and trailer light
check if possible. If the message persists,
have your vehicle checked as soon as
possible.
372
Details