Ford SUPER DUTY 2024 Owner's Manual page 470

CHANGING A REVERSING LAMP
BULB
A Stop lamp, rear lamp bulb, and
Turn signal lamp bulb.
B Reversing lamp bulb.
C Stop lamp, rear lamp bulb, and
Turn signal lamp bulb.
1. Remove the rear lamp assembly. See
Removing a Rear Lamp Assembly
(page 462).
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb by pulling it straight
out.
4. To install, reverse the removal
procedure.
CHANGING A HIGH MOUNTED
STOPLAMP BULB
1. Make sure the lamps are off.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Maintenance
2. Remove the four screws and move the
lamp assembly away from the vehicle
to expose the bulb sockets.
E187290
3. Remove the bulb socket by rotating it
counterclockwise and pulling it out of
the lamp assembly.
4. Pull the bulb straight out of the socket.
5. To install, reverse the removal
procedure.
CHANGING A LICENSE PLATE
LAMP BULB
E163830
1. Switch all of the lamps and the ignition
off.
2. To access the bulb, reach behind the
bumper.
3. Turn the bulb holder counterclockwise
and remove it.
466