Table of Contents
Advertisement
Integrated Trailer Brake Controller
Selecting the Trailer Brake Type
1.
Press Default for trailers with
electromagnetic drum brake systems
or press Electric over Hydraulic for
trailers with electrically actuated
hydraulic brake systems.
2. Press Save.
INTEGRATED TRAILER BRAKE CONTROLLER –
TROUBLESHOOTING
INTEGRATED TRAILER BRAKE CONTROLLER – INFORMATION
MESSAGES
Message
Trailer Connected
Trailer Disconnected
Trailer Wiring Fault
Trailer Brake Gain: {trailer gain value:#0.0}
Trailer Brake Gain: {trailer gain value:#0.0}
No Trailer
2022 Expedition (TB8) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Selecting the Trailer Brake Effort
1.
Select a setting for your trailer.
Note: The default value is Low and is the
recommended setting for most trailers.
Select a different setting if your trailer's
brakes require more initial voltage, or you
prefer more aggressive trailer braking.
2. Press Save.
The system detects a correct trailer
connection during a given ignition cycle.
The system detects the trailer wiring
connection is disconnected, during a given
ignition cycle.
The system detects an electrical fault in
the trailer brake circuit. If this message
appears without a trailer attached, see your
authorized dealer. If a trailer is attached,
inspect and repair the trailer wiring.
Displays the current gain setting for the
trailer brake.
Displays the current gain setting for the
trailer brake when you do not have a trailer
connected.
353
(If Equipped)
Action
Advertisement
Table of Contents
Troubleshooting
