Changing The Remote Control Battery - Vehicles With: Push Button Start - Ford SUPER DUTY 2024 Owner's Manual

Hide thumbs Also See for SUPER DUTY 2024:
Table of Contents

Advertisement

4. Insert a screwdriver as shown to
release the battery.
E151801
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Remove the battery.
6. Install a new battery with the + facing
up.
7.
Replace the battery cover.
Dispose of old batteries in an
environmentally friendly way.
E107998
Seek advice from your local
authority about recycling old batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the battery does not erase
the programmed key from your vehicle. The
remote control should operate normally.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Keys and Remote Controls
CHANGING THE REMOTE
CONTROL BATTERY -
VEHICLES WITH: PUSH
BUTTON START
WARNING: Keep batteries away
from children to prevent ingestion.
Failure to follow this instruction could
result in personal injury or death. If
ingested, immediately seek medical
attention.
WARNING: If the battery
compartment does not securely close,
stop using the remote control and
replace it as soon as possible. In the
meantime, keep the remote control away
from children. Failure to follow this
instruction could result in personal injury
or death.
The remote control uses one coin-type
3-volt lithium battery CR2450 or
equivalent.
E322866
72

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents