Viewing A Flight Plan On The Map; Reversing And Following A Flight Plan; Editing A Flight Plan; Deleting A Flight Plan - Garmin D2 MACH 1 STANDARD Owner's Manual

Viewing a Flight Plan on the Map

1 From the watch face, press START.
2 Select Fly.
3 Hold MENU.
4 Select Navigation > Flight Planning > Saved Plans.
5 Select a flight plan.
6 Select Map.

Reversing and Following a Flight Plan

1 From the watch face, press START.
2 Select Fly.
3 Hold MENU.
4 Select Navigation > Flight Planning > Saved Plans.
5 Select a flight plan.
6 Select Invert and Save Copy to reverse the route and
save it as a copy of the original flight plan.
7 Select the copy of the flight plan.
8 Select Set Active to begin following the flight plan.

Editing a Flight Plan

1 From the watch face, press START.
2 Select Fly.
3 Hold MENU.
4 Select Navigation > Flight Planning > Saved Plans.
5 Select a flight plan.
6 Select Edit.
7 Select an option:
• To view detailed information about a location, select
a location, and select Details.
• To change the order of a location on the route,
select a location, and select Move Up or Move
Down.
• To edit the name of a location, select a location, and
select Name.
• To remove a location from the route, select a
location, and select Remove.
• To add a location to the route, select Add Location.

Deleting a Flight Plan

1 From the watch face, press START.
2 Select Fly.
3 Hold MENU.
4 Select Navigation > Flight Planning > Saved Plans.
5 Select a flight plan.
6 Select Delete > Yes.

Aviation Settings

This watch is not intended to provide primary flight
information and is to be used for supplemental purposes
only.
Hold MENU, and select Aviation.
8
WARNING
Aviation Units: Sets the units of measure used for aviation
data.
Favorite Location: Sets your favorite airport
Favorite Airport, page 8).
METAR Raw: Sets the METAR information to display in
undecoded text.
Flt. Condition Colors: Sets the flight condition colors to a
standard or classic color scheme.
Weather Download: Sets the download limit for aviation
weather data. The Minimal option limits downloads
to your favorite airports to improve battery life. The
Medium option limits downloads to your favorite and
nearest airports. The Maximum option downloads full
METAR data, and may reduce battery life.
Airport Options: Sets the airport options that appear
when searching for airports. For example, you can
set the minimum runway length and surface material,
and indicate whether private airports and heliports are
displayed in search results.
Ownship: Sets the aircraft type to helicopter or plane.
Altimeter Settings: Allows you to customize the altimeter
settings, set an altitude alert, or manually set the
barometric pressure (Altimeter Settings,
NEXRAD Tiles: Allows you to display a single patch
of NEXRAD data, or display additional NEXRAD data
patches based on a direction from your current
location.
NEXRAD Vibe: Sets the device to vibrate when a NEXRAD
patch download completes.
Alerts: Allows you to set aviation alerts
Alerts, page 3).
Clear Weather Cache: Deletes all downloaded aviation
weather data and initiates a new download to refresh
the data.

Selecting a Favorite Airport

When you select a favorite airport, you can view the
waypoint and METAR information for it on the default
watch face and aviation glances.
1 Hold MENU.
2 Select Aviation > Favorite Location.
3 Select an option:
• To search for an airport by its identifier, select
Search by Ident. and enter all or part of the
alphanumeric identifier.
• To search for an airport near you, select Nearest,
and wait while the watch locates satellites.
• To select an airport from your flight plan, select
Flight Plan.
A list of airports appears.
4 Select an airport.

Activities and Apps

Your watch can be used for indoor, outdoor, athletic, and
fitness activities. When you start an activity, the watch
(Selecting a
page 56).
(Setting Aviation
Activities and Apps