Default Watch Face; Customizing The Watch Face; Glances - Garmin D2 MACH 1 STANDARD Owner's Manual

Default Watch Face

This watch is not intended to provide primary flight
information and is to be used for supplemental purposes
only.
When engaged, this feature provides guidance to your
favorite or nearest airport and suggests a runway for
landing based on current wind conditions. Such guidance
is for informational purposes only and does not guarantee
that the airport or the suggested runway is suitable for the
landing of your aircraft. You must still use good piloting
judgment in safely operating and landing your aircraft.
Your D2 Mach 1 watch displays aviation information on
the default watch face. You can hold the watch face data
to open the glance or feature.
METAR information from your favorite or nearest
airport (Selecting a Favorite Airport,
UTC hand. References the 24-hour time markings
on the watch.
Digital clock that can be customized to display your
local time, the time at your favorite airport, UTC, or
a specific time zone
page 38).
Runway information at your favorite or nearest
airport, including the best runway for landing based
on current winds. The arrow indicates the wind
relative to the runway.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you
must install a watch face from the Connect IQ store
(Connect IQ Features, page 67).
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch
face.
1 From the watch face, hold MENU.
2 Select Watch Face.
3 Press UP or DOWN to preview the watch face options.
4 Select Add New to create a custom digital or analog
watch face.
38
WARNING
page 8).
(Customizing the Watch Face,
5 Press START.
6 Select an option:
• To activate the watch face, select Apply.
• To change the style of the numbers for the analog
watch face, select Dial.
• To change the style of the hands for the analog
watch face, select Hands.
• To change the style of the numbers for the digital
watch face, select Layout.
• To change the style of the seconds for the digital
watch face, select Seconds.
• To change the data that appears on the watch face,
select Data.
• To add or change an accent color for the watch
face, select Accent Color.
• To change the color of the data that appears on the
watch face, select Data Color.
• To change the source of digital time that appears on
the default watch face, select Digital Clock.
• To change the source of the weather data that
appears on the default watch face, select Weather.
• To remove the watch face, select Delete.

Glances

Your watch comes preloaded with glances that provide
quick information (Viewing the Glance Loop,
Some glances require a Bluetooth connection to a
compatible phone.
Some glances are not visible by default. You can add them
to the glance loop manually
page 40).
Name Description
Airport infor­ Displays airport details, including radio
mation frequencies and runway information.
Displays the current time of day in
Alternate time
additional time zones
zones
Time Zones,
At altitudes above 800 m (2625
ft.), displays graphs showing altitude-
Altitude accli­ corrected values for your average pulse
mation oximeter reading, respiration rate, and
resting heart rate for the last seven
days.
Displays the altitude alert threshold,
Altimeter pressure altitude, and barometric
pressure correction.
Displays aviation alerts
Aviation alerts
page 3).
Displays the current weather condi­
Aviation
tions and forecasts
weather
Weather Information,
page 40).
(Customizing the Glance Loop,
(Adding Alternate
page 2).
(Aviation Alerts,
(Viewing Aviation
page 4).
Appearance