Tips For Recording A Track Run; Recording An Ultra Run Activity; Viewing Your Ski Runs; Recording A Backcountry Skiing Or Snowboarding Activity - Garmin FENIX 6S PRO Owner's Manual

Tips for Recording a Track Run

• Wait until the GPS status indicator turns green before starting a track run.
• During your first run on an unfamiliar track, run for a minimum of 3 laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
• Run each lap in the same lane.
NOTE: The default Auto Lap
• If you are running in a lane other than lane 1, set the lane number in the activity settings.

Recording an Ultra Run Activity

1 From the watch face, press
2 Select Ultra Run.
3 Press to start the activity timer.
4 Start running.
5 Press LAP to record a lap and start the rest timer.
NOTE: You can configure the Lap Key setting to record a lap and start the rest timer, start the rest timer only,
or record a lap only (Activities and App Settings,
6 When you are done resting, press LAP to resume running.
7 Press UP or DOWN to view additional data pages (optional).
8 After you complete your activity, press

Viewing Your Ski Runs

Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs
based on your movement. The activity timer pauses when you stop moving downhill and when you are on a
chairlift. The activity timer remains paused during the chairlift ride. You can start moving downhill to restart the
activity timer. You can view run details from the paused screen or while the activity timer is running.
1 Start a skiing or snowboarding activity.
2 Hold MENU.
3 Select View Runs.
4 Press UP and DOWN to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.

Recording a Backcountry Skiing or Snowboarding Activity

The backcountry skiing or snowboarding activity lets you switch between climbing and descending tracking
modes so you can accurately track your statistics. You can customize the Mode Tracking setting to
automatically or manually switch tracking modes
1 From the watch face, press
2 Select Backcountry Ski or Backcountry Snowboard.
3 Select an option:
• If you are starting your activity on a climb, select Climbing.
• If you are starting your activity moving downhill, select Descending.
4 Press to start the activity timer.
5 If necessary, press LAP to switch between climbing and descending tracking modes.
6 After you complete your activity, press
Activities and Apps
® distance is 1600 m, or 4 laps around the track.
.
page 80).
, and select Save.
(Activities and App Settings,
.
, and select Save.
page 80).
11