Detect Stapled Originals; Manual Send - Kyocera FAX System 12 Operation Manual

Sending Faxes > Detect Stapled Originals

Detect Stapled Originals

When reading a document from the document processor, if a stapled document is detected, then the reading stops
automatically.
Item
On
Off
NOTE
Requires the optional Document Processor (Dual Scan with Skewed and Multifeed Detection).

Manual Send

This method allows you to send originals by pressing the [Start] key after confirming that the telephone line has
connected to the receiving system.
NOTE
Connecting a telephone set (commercially available product) to this machine enables you to talk with the person at the
receiving system before sending originals.
Manual Send (page 5-48)
1
2
3
4
5
In case of detecting that the original is stapled or the original is fed skewed, the
message is displayed and stop scanning the original.
It does not detect.
Select [Fax] on the Home screen.
Place the originals.
Select [On Hook].
Use the numeric keys to enter the number of the receiving system.
NOTE
To cancel the operation, select [Line Off].
Press the [Start] key.
When you hear the fax tone, the telephone line has connected to the receiving system.
Press the [Start] key. Transmission begins.
Description
3-32