Removing A Paper Jam (Up-810F); Removing A Paper Jam (Up-820F) - Sharp UP-820F Instruction Manual

Removing a paper jam (UP-810F)

Precaution: Be very careful not to cut yourself with the cutter. Never touch the print head immediately after printing,
because the head may still be hot.
1.
Remove the printer cover.
2.
While pushing the cutter open lever to the right, pull up the
cutter unit.
3.
Remove the paper jam. Check for any shreds of paper in the
printer and cutter unit and if any remove.
4.
Pull up the print head release lever to the "up" position.
5.
Remove the receipt paper. Cut off the paper end if it wrinkles
squashed.
6.
Return the cutter unit to its original position. Make sure the
metal part is surely hooked to the cutter open lever.
7.
Return the print head release lever to its original position.
8.
Reset the paper roll correctly by following the steps in "Install-
ing a paper roll".
9.
Replace the printer cover.
In case the cutter blade won't return to its original position due to paper jams or small foreign objects like
NOTE
clips stuck in the cutter unit, turn the gear on the cutter unit using a small screwdriver or some other
tapered tool.

Removing a paper jam (UP-820F)

Precaution: Be very careful with the cutter, so as not to cut yourself. Never touch the print head immediately after
printing, because the head may still be hot.
1.
Remove the printer cover.
2.
Remove the receipt paper, and if the paper jam is at the
journal paper, remove the journal paper, too.
3.
While pushing the cutter open tab, pull up the cutter unit.
4.
Pull the print head release lever all the way forward (after it
stops at one position, continue pulling forward until it stops
again and cannot be pulled forward any further).
5.
Remove the paper jam. Check for and remove any shreds of
paper that may remain in the printer.
6.
Return the print head release lever to its original position.
7.
Return the cutter unit to its original position. Make sure the
metal part is surely hooked to the cutter open tab.
8.
Reset the paper roll(s) correctly by following the steps in
"Installing the paper roll".
9.
Replace the printer cover.
Cutter unit
Cutter open tab
— 273 —
Cutter open lever
Gear
Cutter unit
Pull all the way forward