Guest Check (Glu/Pblu); Glu/Pblu System - Sharp UP-820F Instruction Manual

Guest Check (GLU/PBLU)

Two different guest check entry systems are available: the GLU system and previous balance lookup (PBLU)
system. It depends on how your POS terminal has been programmed which of these is used.
(Consult your authorized SHARP dealer for this selection.)
GLU system: If this system is selected, the balance due and details of the order are saved in the guest check file.
The information can be recalled for additional ordering or finalization by pressing the
entering a GLU code.
PBLU system: If this system is selected, the previous balance is stored in the previous balance lookup file (PB
lookup file). The information can be recalled for additional ordering by entering a previous balance
lookup code (a PBLU code).

GLU/PBLU system

Procedure
For automatic GLU/PBLU
code generation
*1
GLU or
PBLU code
Individual
payment
operation
for table
system
• The GLU/PBLU code refers to a number/code that will be used whenever the guest check must be
NOTE
accessed for re-ordering or final payment.
The range of GLU or PBLU codes that can be entered in each terminal can be programmed, and also
can be specified in the OPX/Z mode for each server.
• Your POS terminal can be programmed for table #/PBLU codes in a sequential fashion. If your POS
terminal has not been so programmed, table #/PBLU codes can be entered manually.
*1 GLU/PBLU code: 1 to 9999
When the range of GLU or PBLU codes is programmed in the PGM2 mode and/or specified in the
OPX/Z mode, a GLU code that can be entered is limited to the range.
*2 The cover count refers to the number of people in a party. When cover count entry is compulsory,
you must enter the cover count (max. 2 digits). When cover count entry is not compulsory, enter the
cover count and press the
number of times the
pressed, the cover count is counted as 1.)
*3 Seat # entry is only for the table system.
When seat # entry is compulsory, you must enter a seat #. To enter the first person #, enter the seat
# (max. 2 digits) and press the
number and press the
The number of times of seat # entry must not exceed the entered cover count.
*4 These are of optional functions (Temporary finalization).
You can temporarily finalize a guest check by pressing the
*2
Cover count
NC
entry
*4
SRVC
*4
FINAL
[Payment operations]
Seat no. entry
IND.
PAYMENT
(max. 2 digits)
key; however, in the table system, it is automatically calculated by the
COVER
COUNT
key is pressed. (When the cover count is not entered and the
SEAT
#
ENTER
key.
SEAT
#
*3
Seat no. entry
To issue a bill
BILL
[Payment operations]
ENTER
To end individual payment
key. To enter the second or subsequent person#, enter the
— 61 —
[Item entries]
BILL
or key. It is advisable to use the
SRVC FINAL
key, or
GLU
RECALL
key is not
SEAT
#