Plu Level Shift (For Direct Plus) - Sharp UP-820F Instruction Manual

PLU level shift (for direct PLUs)

This function can increase the number of direct PLUs on your POS terminal without adding additional direct PLU
keys. You can use direct PLUs in five levels by utilizing the PLU level shift keys
The level key shifts the PLU level to the required level. (The normal level is level 1.)
You must program your machine in the PGM2 mode to select one of the two PLU level shift modes — automatic
return mode* or lock shift mode** — and decide whether to allow both the manager and servers/cashiers or only
the manager to perform the PLU level shift function.
* The automatic return mode automatically shifts the PLU level back to the preset level after pressing a direct PLU
key or finalizing each transaction.
** The lock shift mode holds the current PLU level until another PLU level shift key is pressed.
Automatic return mode (for PLU levels)
If your terminal has been programmed for PLU level shift in the automatic return mode, press a desired PLU level
shift key before a numeric entry.
Procedure
(Returning every item entry to the preset level)
LEVEL LEVEL
thru
1
(Level no.: 1 to 5)
(Returning every transaction to the present level)
LEVEL LEVEL
thru
1
(Level no.: 1 to 5)
When using the FF method (PLU), you need not press the
NOTE
Lock shift mode (for PLU levels)
If your terminal has been programmed for PLU level shift in the lock shift mode, press a desired PLU level shift key
before a numeric entry.
Procedure
LEVEL LEVEL
thru
1
(Level no.: 1 to 5)
• When using the FF method (PLU), you need not press the
NOTE
5
Numeric entry
(Q'ty,
LEVEL
#
5
Numeric entry
(Q'ty,
LEVEL
#
5
Numeric entry
(Q'ty,
LEVEL
#
Direct PLU
@
)
FOR
Direct PLU
@
)
FOR
Direct PLU
@
)
FOR
— 49 —
thru .
LEVEL LEVEL
1 5
Preset level
(Finalization)
key for a multiplication entry.
The current level is hold.
key for a multiplication entry.