Table Tax - Sharp UP-820F Instruction Manual

Table tax

Your POS terminal has an automatic tax calculation feature which allows you to program four tax tables.
Automatic tax calculations require you to program, in addition to tax tables, the tax status of each pertinent depart-
ment, PLU, and function key.
Sample tax table
New Jersey tax table: 6%
Range of sales amount
Tax Minimum breakpoint
.00 .01
...... ......
.01 –T .11 –Q
...... ......
.02 .23
.39
.03
.04 .57
.05 .73
.89
.06
........
.07 1.11 –M1
........
.08 1.23
.09 1.39
.10 1.57
.11 1.73
.12 1.89
........
.13 2.11 –M2
........
To program a tax table, first make a table like the right table shown above.
From the tax table, calculate the difference between each minimum breakpoint and the next one (A). Then, from
the differences, find irregular cycles (B) and regular cycles (C and D). In connection with these cycles, the following
items necessary to program a tax table will be shown:
T: Tax amount collected on the minimum taxable amount (Q)
Q: Minimum taxable amount
M1: Maximum value of the minimum breakpoint on a regular cycle (C).
We call this point "MAX point."
M2: Maximum value of the minimum breakpoint on a regular cycle (D).
We call this point "MAX point."
M: Range of the minimum breakpoint on a regular cycle: difference between Q and M1 between M1 and M2
Maximum breakpoint
to
.10
to .22
to .38
to
.56
to .72
to .88
to
1.10
to 1.22
to 1.38
to
1.56
to 1.72
to 1.88
to
2.10
to 2.22
— 238 —
A: Difference between a
minimum breakpoint and
the next one (¢)
-
10 (0.11 - 0.01)
12 (0.23 - 0.11)
16 (0.39 - 0.23)
18 (0.57 - 0.39)
16 (0.73 - 0.57)
16 (0.89 - 0.73)
22 (1.11 - 0.89)
12 (1.23 - 1.11)
16 (1.39 - 1.23)
18 (1.57 - 1.39)
16 (1.73 - 1.57)
16 (1.89 - 1.73)
22 (2.11 - 1.89)
B: Non-cyclic
C: Cyclic 1
D: Cyclic 2