Computation Of Vat (Value Added Tax)/Tax; Vat/Tax System - Sharp UP-3500 Instruction Manual

Computation of VAT (Value Added Tax)/Tax

I I I I I VAT/tax system
The POS terminal may be programmed for the following six tax systems by your authorized SHARP dealer.
• • • • • Automatic VAT 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages.
• • • • • Automatic tax 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages, and also adds the calculated
taxes to those subtotals, respectively.
• • • • • Manual VAT 1 through 6 system (Manual entry method using programmed percentages)
➝
[SUBTOTAL]
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals. This calculation is performed using the corresponding programmed percentages when
the [VAT] key is touched just after the [SUBTOTAL] key.
• • • • • Manual VAT 1 through 6 system (Manual entry method using programmed percentages)
➝
[SUBTOTAL]
➝
[SUBTOTAL]
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT
1 preset percentages when the [VAT] key is touched just after the [SUBTOTAL] key. For this system, the
keyed-in tax rate can be used.
• • • • • Manual tax 1 through 6 system (Manual entry method using programmed percentages)
➝
[SUBTOTAL]
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and taxable
6 subtotals. This calculation is performed using the corresponding programmed percentages when the
[VAT] key is touched just after the [SUBTOTAL] key. After this calculation, you must finalize the transaction.
• • • • • Automatic VAT 1 through 3 and tax 4 through 6 system
This system enables the calculation in the combination with automatic VAT 1 through 3 and tax 4 through 6.
This combination can be any of VAT 1 through 3 and tax 4 through 6. The tax amount is calculated
automatically with the percentages previously programmed for these taxes.
VAT/tax assignment is printed at the fixed right position of the amount on the receipt and bill as follows:
➝
VAT1/tax1 A
➝
VAT2/tax2 B
➝
VAT3/tax3 C
➝
VAT4/tax4 D
➝
VAT5/tax5 E
➝
VAT6/tax6 F
When the multiple VAT/tax is assigned to a department or a PLU, a smaller number of the VAT/tax will be
printed. For details, contact your authorized SHARP dealer.
66
➝
[VAT]
➝ ➝
VAT rate [VAT]
➝
[VAT] (When the programmed rate is used.)
➝
[VAT]