Extraordinary Maintenance - Smeg A2PYID-8 Manual

Instructions for the user

10. EXTRAORDINARY MAINTENANCE

The oven requires periodic minor maintenance or replacement of parts subject
to wear, such as gaskets, light bulbs, etc. Specific instructions for each operation
of this kind are given below.
Before any intervention that requires accessing live parts, disconnect the
appliance from the power supply.
If a problem cannot be resolved through ordinary maintenance or in case of
other types of fault, contact your local technical support centre.
10.1 Replacing the light bulb
If a light bulb needs to be replaced because it is
worn or burnt out, remove the guide frames;
see "9.6.1 Removing guide frames (where
present)".
Then remove the bulb cover using a tool (e.g. a
screwdriver).
Remove the bulb by unscrewing (filament
bulbs) or pulling it out (halogen bulbs) in the
indicated direction. Replace the bulb with one
of the same type (25W for filament bulbs or
40W for halogen bulbs).
Press the cover down as far as it will go so that it attaches completely to the bulb
support.
10.2 Replacing the light bulb (auxiliary oven)
If a light bulb needs to be replaced because it is
worn or burnt out, unscrew the bulb cover.
Remove the bulb by unscrewing it and then
replace it with a similar bulb (25W).
92