Table of Contents
Advertisement
Instructions for the user
6.12 Power management
The hob is fitted with a power management module that
optimises/limits consumption. If the overall set power
levels surpass the maximum limits permitted, the
electronic circuit board will automatically manage the
power supplied by the hot plates.
The module will try to maintain the maximum possible
power levels supplied and the levels imposed by the
automatic management will appear on the display. The flashing of a power level
indicates that it will automatically be limited to a new level selected by the power
management module.
Priority is given to the last zone set.
6.13 Control lock
The control lock is a device that protects the appliance from accidental or
inappropriate use. With all cooking zones turned off, simultaneously turn the first
two knobs to the left (position "A"). Keep them turned until the symbols
appear on the display, then release the knobs.
In order to remove the control lock repeat the same operations previously
described.
If the knobs have been kept rotated in the "A" position for more than 30 seconds
a fault message
will appear on the display.
After a prolonged period of interruption to the power supply, the control lock will
be deactivated. If this is the case, turn it back on as described above.
69
Advertisement
Table of Contents
