Contents 1 Instructions 1.1 General safety instructions 1.2 Identification plate 1.3 Manufacturer liability 1.4 Appliance purpose 1.5 Disposal 1.6 This user manual 1.7 How to read the user manual 2 Description 2.1 General Description 2.2 Control panel 2.3 Other parts 3 Use 3.1 Instructions 3.2 First use...
Instructions 1 Instructions • Have qualified personnel carry out installation and assistance 1.1 General safety instructions interventions according to the standards in force. Risk of personal injury • Do not try to repair the appliance yourself or without the intervention •...
Instructions • Do not obstruct ventilation • Tampering with any part of the appliance; openings and heat dispersal slots. • Use of non-original spare parts. • Never leave the appliance unattended during cooking 1.4 Appliance purpose operations where fats or oils This appliance is intended for cooking food could be released.
Instructions 1.7 How to read the user manual • Deliver the appliance to the appropriate recycling centre for electrical and This user manual uses the following reading electronic equipment waste, or return it to conventions: the retailer when purchasing an Instructions equivalent product, on a one for one basis.
Description 2 Description 2.1 General Description 1 Control panel 5 Oven fan 2 Oven light 6 Rack/tray support frames 3 Seal Frame shelf 4 Door 2.2 Control panel 1 Temperature/function knob 2 Thermostat indicator light This knob allows you to select the cooking When the indicator light is fixed, it indicates temperature.
Description 3 Timer indicator light Safety thermostat The appliance is equipped with a safety When off, it indicates the beginning of device that triggers in case of serious timed cooking. When on, it indicates that malfunction. To re-arm the safety device timed cooking has finished.
3 Use High temperature inside the oven during use 3.1 Instructions Danger of fire or explosion High temperature inside the oven • Do not spray any spray products near during use the oven. Danger of burns • Do not use or leave flammable materials near the oven.
3.2 First use 3.4 Cooking modes 1. Remove any protective film from the Defrosting outside or inside of the appliance, The movement of air at room including accessories. temperature causes frozen food to 2. Remove any labels (apart from the defrost quickly.
Cleaning and maintenance 4 Cleaning and maintenance 4.4 Food stains or residues Do not use metallic sponges or sharp 4.1 Instructions scrapers as they will damage the surfaces. Use ordinary non-abrasive products with Improper use the aid of wooden or plastic utensils if Risk of damage to surfaces necessary.
Cleaning and maintenance 4.7 Removing the internal glass panels For easier cleaning the door internal glass panels can be disassembled. 1. Remove the internal glass panel by pulling the rear part gently upwards, following the movement indicated by the arrows (1). 2.
Cleaning and maintenance 4. Reposition the internal glass panel. Take care to centre and insert the 4 pins into their housings in the oven door by applying slight pressure. To remove the guide frames, pull the frame upwards to unhook it from its groove, then slide it out of the seats at the back.
Cleaning and maintenance 4.9 Extraordinary maintenance 6. Refit the cover correctly, so that the moulded part of the glass is facing the Live parts door. Danger of electrocution • Disconnect the oven power supply. Replacing the internal light bulb 1. Completely remove all accessories from inside the oven.
Cleaning and maintenance 4.10 If the appliance is not working properly Problem Likely solution • The timer knob is positioned on 0. • The plug is not properly inserted in the socket. The oven is not working • The electrical system is damaged or not working properly.
Installation 5 Installation General information Check the grid characteristics against the 5.1 Electrical connection data indicated on the plate. The identification plate bearing the Power voltage technical data, serial number and brand Danger of electrocution name is visibly positioned on the appliance. Do not remove this plate for any reason.
Installation Fixed connection 5.2 Positioning Fit the power line with an omnipolar circuit Heavy appliance breaker in compliance with installation Danger of crush injuries regulations. The circuit breaker should be located near • Position the appliance with the aid of a the appliance and in an easily reachable second person.
Page 16
Installation Steam outlet pipe The appliance support base should not exceed a height of 1.60 m from the floor. Depending on the model, there are two The appliance must be installed on a exhaust flues on the back of the appliance worktop.