Smeg A2PYID-8 Manual page 18

Instructions for the user
6.9 Residual heat
If the cooking zone is still hot after being switched off, the symbol will appear
on the display. The symbol clears once the temperature drops below 60°C.
Supervise children carefully as they cannot readily see the residual heat
indicator. The cooking zones remain hot for a certain period of time even after
they have been turned off.
6.10 Heating accelerator
Each cooking zone is equipped with a heating accelerator that allows to supply
the maximum power for a time that is proportional to the selected power.
Turn the knob to the left to the "A" position and then release; the symbol
appears on the display. Select the required heating power (1..8) within 3
seconds. The selected power and symbol will flash alternately on the
display.
The power level can be increased at any moment, the "maximum power" period
will automatically be modified.
If the power is reduced, turning the knob anti-clockwise, the heating accelerator
will automatically be disabled.
Up to four cooking zones can be activated simultaneously in the heating
accelerator function (see 6.12 Power management). If a fifth zone is activated,
the system will automatically deactivate one of the previously activated zones.
6.11 Booster function
The booster function allows to activate the cooking zone at maximum power as
long as 10 minutes. It can be used to bring a large quantity of water to a boil
rapidly or to broil meat.
Turn the knob clockwise to the "P" position for two seconds and then release;
the symbol will appear on the display. After 10 minutes the booster function
will automatically be disabled and cooking will continue at power level "9".
The booster function has priority over the heating accelerator function.
68