Installing Sensor Probes - Hussmann PSM15E3R Installation Manual

INSTALLATION
3.11

INSTALLING SENSOR PROBES

Probe Locations:
1. Air off probe in honeycomb panel.
2. Air on probe in air return grille.
3. Defrost temp probe in coil area.
4. Suction coil temp probe in coil area.
Ensure case earthed when proceeding
with electical components. Electric
shock or fire may occur if not correctly
processed.
PAGE 24
Probe Locations:
Air Off Probe
. .
This probe is located in the canopy under the
panel in Figure 3AB. The probe needs to be posi-
tioned so that it is in the air and is not touching
any parts that may influence the reading.
Air Off Probe
Defrost
Temp Probe
Suction Coil
Temp Probe
Air On Probe
Defrost Temperature Probe
This probe is located at the top of the coil on the
left hand side of the base, as per Figure 3AC.
FIGURE 3AA
Air Off Temp Probe
Defrost Temp Probe
PSM15E3R SEMI-VERTICAL - HUSSMANN
FIGURE 3AB
FIGURE 3AC