Table of Contents
Advertisement
Log #3
Install log #3 as shown below. The log rests on the bottom burner. There is a notch in the front left of the
log that aligns the log with the left finger of the log grate. Pull the left end of the log forward until it is in
contact with the grate. Push the right side of the log backwards until it contacts the sloped portion of the
burner (see below).
Log #4
Install log #4 as shown below. The hole on the bottom of the log rests on the pin on log #2. The left end
of the log rests on the bottom burner surface and should be pulled forward until the log contacts the log
grate.
© Travis Industries
Maintenance
Pull left side of
log forward
4/22/21 - 1514
Push right side
of log backward
PB 24 CF GSB2 Operation
15
Advertisement
Table of Contents
