Table of Contents
Advertisement
14
Log #1
Install log #1 as shown below. There are two holes on the bottom of the log that fit over the pins on the
corners of the top burner.
Log #2
Install log #2 as shown below. The log rests on the bottom burner. There is a notch in the front right of
the log that aligns the log with the right finger of the log grate. Pull the right end of the log forward until it
is in contact with the grate. Push the left side of the log backwards until it contacts the sloped portion of
the burner.
© Travis Industries
Maintenance
Push left side of
log backward
Pull right side
of log forward
4/22/21 - 1514
PB 24 CF GSB2 Operation
Advertisement
Table of Contents
