Conf+ - Conference Add; Drop - Drop; Dpkup - Directed Call Pickup; Dcw - Dial Cw - Avaya 4620 User Manual

Hide thumbs Also See for 4620:
Table of Contents

Advertisement

The 4620 Telephone
4620 User's Guide
IP Office

Conf+ - Conference Add

Places all calls held by the extension into a conference.
Pressing
Conf+ places the extension and any calls it has put on hold
into a conference. This function will not work if the extension has a current
call.

Drop - Drop

Clears a current call, temporarily pauses the ringing of an incoming call.
For an incoming call ringing the extension, pressing
the ringing for a few seconds before ringing again. Note: If the timers for
forwarding or diversion to voicemail expire during the silent period, those
actions will occur without the call ringing at the extension again.
For a call in progress, pressing

DpkUp - Directed Call Pickup

The
DPkUp key displays the programmed number of a target extension
or group. When a call is ringing at the extension or group, press
DPkUp to answer (pick up) that call.

DCW - Dial CW

Allows the user to force another extension to have call waiting mode on.
Pressing DCW bypasses the target phone's call-waiting status so the
waiting call will be presented. This function requires the target extension
number to be entered when programmed. That number is then shown next
to
DCW.
Normally, if the target extension is on a call and does not have call waiting
on, any new call will receive a busy tone or be diverted to voicemail.
Pressing
DCW will cause the target extension to receive call waiting
indication and allow the caller to hear ringing until answered.

Dirct - Dial Direct

Connects a call to the target extension without any ringing.
This function requires the target extension number to be entered when
programmed. That number is then shown next to Dirct. The target
extension must be capable of auto-answering.

DNDOn - Do Not Disturb On

Puts the extension into 'do not disturb' (no calls) mode.
Pressing
DNDOn toggles the extension's do not disturb status. When
on, DNDOn is shown on a dark background and the top line of the display
includes an N (No calls). When off, DNDOn is shown on the default screen
background.
This function has the same effect as SAC - Send All Calls".
40DHB0002UKEP - Issue 1 (4th November 2003)
Drop switches off
Drop disconnects the caller.
Page 28
Page 28

Advertisement

Table of Contents
loading

Table of Contents