Table of Contents
Advertisement
installation
ACCESSORIES
Depending on the model that you have purchased, you are supplied with
several accessories that can be used in a variety of ways.
1. Roller ring, to be placed in the centre of the oven.
Purpose: The roller ring supports the turntable.
2. Turntable, to be placed on the roller ring with the
centre fitting on to the coupler.
Purpose: The turntable serves as the main cooking
3. High rack, Low rack, to be placed on the turntable.
Purpose: The metal racks can be used to cook two
4. Crust plate, to be placed on the turntable.
Purpose: The crust plate is used to brown botton
DO NOT operate the microwave oven without the roller ring and
turntable.
surface; it can be easily removed for
cleaning.
dishes at the same time. A small dish may
be placed on the turntable and a second
dish on the rack. The metal racks can be
used in grill, convection and combination
cooking.
of food by using the microwave or grill
combination cooking modes and to keep
pastry and pizza dough crispy.
INSTALLATION SITE
20 cm above
20 cm above
10 cm behind
10 cm behind
85 cm of
85 cm of
the floor
the floor
• Conform to the power supply specifications of this oven. Use only
approved extension cables if you need to use.
• Wipe the interior and the door seal with a damp cloth before using your
oven for the first time.
TURNTABLE
English - 8
• Select a flat, level surface approx.
85 cm above the floor. The surface
must support the weight of the
oven.
• Secure room for ventilation, at
least 10 cm from the rear wall and
both sides, and 20 cm from above.
• Do not install the oven in hot or
10 cm on
10 cm on
damp surroundings, such as next
the side
the side
to other microwave ovens or
radiators.
Remove all packing materials inside
the oven. Install the roller ring and
turntable. Check that the turntable
rotates freely.
Advertisement
Table of Contents
