Section 5. Place Unit At Location - Trane GAM5B0A18M11EB Installation, Operation And Maintenance Manual

Section 5. Place Unit at Location

5.1 Carry Unit
STEP 1 - Carry the unit to the installation location.
STEP 2 - Reassemble by reversing the steps listed in
Section 4 if disassembly was required.
Important: Under no conditions should metal strap-
ping be attached to the unit to be used as support
mechanisms for carrying or suspension purposes.
Approved carrying:
1. Hold by the unit top plate or crossmembers
and use as handle for lifting and carrying the
coil and blower sections.
Unit Top Plate
Cross Members
11