Section 5. Place Unit At Location - Trane GAF2A0A36M31EC Installer's Manual

Section 5. Place Unit at Location

5.1 Carry Unit
STEP 1 - Carry the unit to the installation location.
STEP 2 - Reassemble by reversing the steps listed in
Section 4 if disassembly was required.
Important: Under no conditions should metal
strapping be attached to the unit to be used as support
mechanisms for carrying or suspension purposes.
Approved carrying:
1. Hold by the cross members within the cabinet or
unit top plate and use as handles for lifting and
carrying the coil and blower sections.
8
Cross Member
Unit Top Plate