5 Installation and Wiring
2
Press the SD Memory Card after you confirm that the SD BUSY indicator (lit while SD Memory
Card access is in progress) and SD PWR indicator (lit while SD Memory Card power is sup-
plied) are no longer lit.
The SD Memory Card will be ejected from the compartment.
3
Pull out the SD Memory Card.
4
Close the Memory Card cover.
5-3-9
Battery Installation
Battery to Use
Use the Battery CJ1W-BAT01 which is sold separately.
5-26
SD Memory Card
NX-series NX102 CPU Unit Hardware User's Manual (W593)