Network Configuration - Omron NX Series Hardware User Manual

2-3

Network Configuration

You can make networks in the following layers with an NJ/NX-series Controller.
For details on communications networks that you can connect to, refer to the NJ/NX-series CPU Unit
Software User's Manual (Cat. No. W501).
Information
Communications
Level
EtherNet/IP
Built-in EtherNet/IP ports
NJ-series
CPU Unit
CompoNet Master Unit
DeviceNet Unit
Field Level
CompoNet
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
MS NS WORD NODE ADR MS NS WORD NODE ADR MS NS WORD NODE ADR
OUT OUT
CRT1-OD16 CRT1-OD16 CRT1-OD16
REMOTE TERMINAL REMOTE TERMINAL REMOTE TERMINAL
CompoNet slaves
DeviceNet slaves
Sysmac Studio
Between Controllers
Devices
NX-series NX102 CPU Unit Hardware User's Manual (W593)
FA Sysmac
Studio
Software
Built-in EtherNet/IP port 1
Built-in EtherNet/IP port 2
NX-series
NX102
CPU Unit
Built-in
EtherCAT port
Serial
Communications
Unit
RS-232C,
RS-422A/485
Serial communications devices
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
OUT
General-purpose components or OMRON components
DeviceNet
Connection
NJ/NX-series Controller or CJ-series PLC
Servo Drives, general-purpose slaves
and Vision Systems
Ethernet communications devices
Serial communications devices
DeviceNet slaves
CompoNet slaves
FA Wireless
LAN Unit
Programmable
terminal
NX-series Communications
Interface Unit
Serial communications devices
General-purpose components or OMRON components
EtherCAT
General-purpose
slaves
EtherCAT
Slave Terminal Servo Drives
EtherNet/IP
RFID system
Use the built-in EtherNet/IP port.
Use the built-in EtherNet/IP port or a port on an
EtherNet/IP Unit.
Use the built-in EtherCAT port.
Use the built-in EtherNet/IP port or a port on an
EtherNet/IP Unit.
Mount the following Units and use RS-232C port or
RS-422A/485 ports.
•
CJ-series Serial Communications Unit
•
NX-series Communications Interface Unit
Mount a CJ-series DeviceNet Unit
Mount a CJ-series CompoNet Master Unit
CompoNet.
2 System Configuration
NJ/NX-series
CPU Unit
Vision Systems
Robots
Connection method
*1
*1
*2
*3
*2
and use DeviceNet.
*2
and use
2
2-7