Preparations For Installation - Omron NX Series Hardware User Manual

5 Installation and Wiring
NX-series
Controller
EtherCAT Slave
Terminal, etc.
5-3-2

Preparations for Installation

We recommend using the following products to install the Unit on a DIN Track.
Name
35-mm DIN Track
5-12
Output duct
Input duct
Fuses,
relays,
Terminal
timers, etc.
blocks for
Do not
PLC
install
devices that
generate
heat or
power
equipment.
Model
PFP-50N OMRON Corporation
PFP-100N OMRON Corporation
NS 35/ 7,5 PERF Phoenix Contact
NS 35/ 15 PERF Phoenix Contact
Power duct
200 mm min.
Breakers,
fuses
Power
equipment
such as
transform-
ers and
magnetic
relays
Terminal
blocks for
power
equipment
Manufacturer
•
Length: 50 cm
•
Material: Aluminum
•
Surface treatment: Insulated
•
Length: 100 cm
•
Material: Aluminum
•
Surface treatment: Insulated
•
Length: 75.5, 95.5, 115.5, or 200 cm
•
Material: Steel
•
Surface treatment: Conductive
•
Length: 75.5, 95.5, 115.5, or 200 cm
•
Material: Steel
•
Surface treatment: Conductive
NX-series NX102 CPU Unit Hardware User's Manual (W593)
Remarks