Omron NX Series Hardware User Manual page 161

Installation Height
The installation height of the CPU Rack depends on the model of DIN Track and on the models of NX
Units that are mounted.
Also, additional space is required for the cables that are connected to the Unit. Allow sufficient depth in
the control panel and allow extra space when you mount the CPU Rack.
The following figure shows the dimensions from the cables connected to the CPU Rack to the back of
the Unit. The unit of dimension is millimeter.
The height from the mounting surface of the DIN Track varies depending on the DIN Track to be used.
Refer to Installation Dimensions on page 5-31 for the height of individual DIN Track type.
Approx. 132 to 142
*1. This is the dimension from the back of the Unit to the communications cables.
Approx. 132 mm: When MPS588-C connector is used
Approx. 142 mm: When XS6G-T421-1 connector is used
Precautions for Safe Use
Do not pull on the cables or bend the cables beyond their natural limit.
Doing so may break the cables.
NX-series NX102 CPU Unit Hardware User's Manual (W593)
90
*1
Unit: [mm]
5 Installation and Wiring
5-33
5