English
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. If Call Alert
Tone Auto Reset is enabled, you hear one alert tone and
the LED blinks green. The call received icons blinks and
the display shows Page received.
Press the PTT button to answer or press any button
to clear the Call Alert page.
See
Making a Talkgroup Call on page 68
Private Call (Trunking Only) on page 68
information on returning the call.
Sending a Call Alert Page
Do one of the following to send a call alert page:
98
•
or
Making a
for more
NOTICE:
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is
left idle long enough for the time to expire. You hear
the Menu Inactive Exit Tone upon feature exit.
Sending a call alert page using the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a. Press the preprogrammed Quick Access (One-
Touch) Call Alert Paging button to send a page
to the preprogrammed ID.
The display shows Paging...<Number> or
<Alias>.
If the call alert page is sent successfully, you hear
four high-pitched tones and the display shows
Ack received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below OK to return to the main screen for
Contacts.