Geofence (Astro 25 Trunking System) - Motorola APX 4500Li User Manual

English
This feature is also operable in a Scan Active channel or
Scan Talkback channel.
Upon receiving a voice transmission with GPS coordinates
enabled on the receiving radio, the display shows the
coordinates available in full or in short coordinates. There
are two different formats available. Refer to the following
list for the details shown in the Peer-Location quick text.
Consult your agent to pick the best format to configure to
your radio.
Full location coordinates
• PTT ID (This is optional.)
• Longitude and latitude
• Relative distance or direction
Short location coordinates
• PTT ID (This is optional.)
• Longitude and latitude
146
NOTICE:
If the transmitting radio is stale at its location after a
period of time, the receiving radio display shows
ID:<PTT ID> Last Knwn Loc: <Coordinates>.
The ID:<PTT ID> and <distance> are optional
details depending on the requirements of usage.
If the transmitting radio does not have GPS or the
receiving radio could not decode the GPS signal of
the received signal, the receiving radio display
shows ID:<PTT ID> Unknown Loc. The PTT ID is
optional to be shown on the display per
requirements of usage.
Geofence (ASTRO 25 Trunking
System)
Geofence is a virtual perimeter based on the GPS to define
a geographical area on earth.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
When the radio enters the predefined Geofence area, your
radio receives the Dynamic Regroup command from the
system and immediately connects to a Dynamic Regroup
talkgroup. The radio display shows the new selected