Table of Contents
Advertisement
MN006727A01-AA
Advanced Features
NOTICE: Deleting a nuisance channel is only possible through the preprogrammed Nuisance
Channel Delete button.
Procedure:
When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance
Delete button.
The radio continues scanning the remaining channels in the list.
6.3.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
•
Stop and restart a scan.
•
Mode change to another channel and back to the original channel.
•
Turn off the radio and then turn it on again.
6.4
Call Alert Paging
This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTICE: This feature must be preprogrammed by a qualified radio technician.
6.4.1
Receiving a Call Alert Page
When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows PAGE RCV.
Procedure:
Press any button to clear the Call Alert page.
6.4.2
Sending a Call Alert Page
When and where to use:
Your radio must be preprogrammed for you to use this feature.
Procedure:
•
Press the preprogrammed Call Alert Paging button to send a page to the preprogrammed ID.
44
Advertisement
Table of Contents
