Channel Change On Off Hook On All Channels - Motorola APX 4500Li User Manual

English
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select
button directly below Sel.
The display shows the Select Site screen.
4
or to [All Avail] and press the Menu
Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system
or in a failsoft situation, the display shows Req
failed.
If the request is successful, the display shows Req
successful.
5 To return to the Home screen, press the Menu
Select button directly below Exit.
The SSA Alert for all available sites stop.
162
Channel Change on Off Hook on All
Channels
This feature enables the mode of the radio to be changed
based on the HUB on/off-hook state on all control heads.
Whenever the radio goes off-hook, the radio changes to a
preprogrammed zone channel specifically for off-hook
state. When the user returns the radio to on-hook state, it
reverts to its previous channel zone before the radio goes
off-hook.
When the radio is in off-hook state, manual mode change
(including mode change triggered by third party devices) is
allowed. Radio reverts back to the last mode before off-
hook once the radio goes on-hook.