English
Non-Tactical/Revert for Trunking System
The radio reverts to the preprogrammed emergency
talkgroup (trunking system) or channel (conventional
system) to send an alarm and/or make an emergency
call.
NOTICE:
When changing channels during Emergency
transmissions:
•
If the new channel is also preprogrammed for
Emergency, you can change channels while in
Emergency operation. The emergency alarm or
call continues on the new channel.
•
If the new channel is not preprogrammed for
Emergency, the display shows No emergency,
and you hear an invalid tone until you exit the
Emergency state or change to a channel
preprogrammed for Emergency.
When enabled, the Emergency Keep-Alive feature
prevents the radio from being turned off by using the
On/Off/Volume Control Knob when the radio is in
the Emergency state.
102
Exiting Emergency
The dispatch console that supports this feature can be
programmed to clear the emergency state of the radio.
Check with your dealer or system administrator for more
information on dispatch console supporting this feature.
1 To exit emergency, press and hold the
preprogrammed Emergency button for about a
second.
2 Perform one of the following actions:
If...
Then...
Press and hold the preprogram-
med Emergency button until
you hear the emergency exit
tone.
a From the Home screen,
b Tap Cancel and confirm the
swipe down the Status Bar.
action by tapping Yes.