English
button directly below page or call. The call is
entered on the selected channel and scanning is
halted until the call is exited by pressing
pressing the Menu Select button below either page
or call.
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed "nuisance" channel), you can temporarily remove
the unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
When the radio is locked onto the channel to be
deleted, or to Nuis and press the Menu Select
button directly below Nuis.
The radio continues scanning the remaining channels in
the list.
96
Restoring a Nuisance Channel
or
To restore the deleted nuisance channel, perform
one of the following actions:
•
Stop and restart a scan.
•
Mode change to another channel and back to the
original channel.
•
Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the
system administrator.
Changing Priorities Status While Scan
is On
While the radio is scanning, the dynamic priority change
feature allows you to temporarily change any channel in a
scan list (except for the Priority-One channel) to the
Priority-Two channel.