Receiving A Call Alert Page; Sending A Call Alert Page; Recent Calls; Instant Recall - Motorola APX 8000XE User Manual

Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTICE: This feature must be preprogrammed by a qualified radio technician.
6.6.1

Receiving a Call Alert Page

When and where to use:When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows PAGE RCV.
Procedure:
Press any button to clear the Call Alert page.
6.6.2

Sending a Call Alert Page

When and where to use:
Your radio must be preprogrammed for you to use this feature.
Procedure:
• Press the preprogrammed Call Alert Paging button to send a page to the preprogrammed ID.
If the call alert page is sent successfully, a tone sounds and the display shows the current zone
and channel name.
If the call alert page is not acknowledged, a tone sounds and the display shows the current zone
and channel name.
6.7

Recent Calls

6.7.1

Instant Recall

This feature allows you to playback the recent received calls and save them in your radio. Check with
your system administrator for the duration of the recorded calls that your radio supports. All saved calls
are removed upon radio power cycle.
6.7.1.1

Saving and Playback Calls

When and where to use:
Procedure:
• Saving the recorded calls using the preprogrammed Record Playback button:
a. Long press the preprogrammed Record Playback button to save the recorded calls.
MN002667A01-AR
Chapter 6: Advanced Features
41