What Else Do I Need - Juniper ACX7100 Quick Start Manual

NOTE: We no longer include a DB-9 to RJ-45 cable or a DB-9 to RJ-45 adapter with a CAT5E copper cable as
part of the device package. If you require a console cable, you can order it separately with the part number JNP-
CBL-RJ45-DB9 (DB-9 to RJ-45 adapter with a CAT5E copper cable).

What Else Do I Need?

• Someone to help you secure the router to the rack
• A number 2 Phillips (+) screwdriver
• An electrostatic discharge (ESD) grounding strap
• A management host such as a laptop or desktop PC
• A serial-to-USB adapter (if your laptop or desktop PC doesn't have a serial port)
• A grounding cable: 14-10 AWG (2-5.3 mm²), stranded wire, or as permitted by the local code, with a Panduit
LCD10-10A-L or equivalent lug attached
• Two #10-32 screws to secure the grounding lug
CAUTION: Ensure that a licensed electrician has attached the appropriate grounding lug to your
grounding cable. Using a grounding cable with an incorrectly attached lug can damage the router.
Install the ACX7100-48L in a Rack
Here's how to install the ACX7100-48L in a four-post rack:
1. Review the General Safety Guidelines and
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to a site
ESD point.
3. Decide which end of the router you want to place at the front of the rack. Position the router so that the AIR IN labels
are facing the cold aisle, or the AIR OUT labels are facing the hot aisle.
4. Attach the mounting rails to the sides of the router using the 12 flat head screws.
5. Lift the router and position it in the rack. Line up the bottom hole in each mounting rail with a hole in each rack rail,
making sure the router is level.
Warnings.
3