Power Cord Connection - Gree GMV-N12U/C-T(U) Owner's Manual

5.2 Power Cord Connection

NOTICE
Each indoor unit must be installed with an independent circuit breaker for short-circuit
protection and overload protection. In general, this circuit breaker is under close status.
During operation process, all indoor units and outdoor units in one system must be energized.
Otherwise, the system can't operation normally.
Power supply of each indoor unit must be from the same source.
Power connection diagram for one AHU-KIT connected to one AHU:
(1) Detach the electric box lid.
(2) Let the power cord pass through the wiring through-holes.
(3) Connect the power cord to terminal "L1, L2,
(4) Fix the power cord with wiring clamp.
Power connection diagram for several AHU-KITs in parallel connection with one AHU:
Fig.5.1.1
Fig.5.2.1
Fig.5.1.2
".
33
AHU-KIT
Unit: mm(inch)