Power Cord Connection - Gree GMV-ND07PHS/B-T(U) Owner's Manual

Multi Variable Air Conditioners Ducted Type Indoor Unit
(2) The connection of stranded wire (as shown in Fig.5.1.2)
1) Strip about 10mm (3/8inch) insulation of the end of stranded wire by stripping and cutting
tool.
2) Loosen the wiring screws on terminal board.
3) Insert the wire into the ring tongue terminal and tighten by crimping tool.
4) Use the screwdriver for tightening the terminal.

5.2 Power Cord Connection

① Every unit should be equipped with a circuit breaker for short-circuit and overload
protection.
② During operation, all indoor units connected to the same outdoor unit system must be
kept energized status. Otherwise, the unit can't operate normally.
Fig.5.1.1
Fig.5.2.1
19
Fig.5.1.2
Unit: mm (inch)