Table of Contents
Advertisement
3.5.2 Piping Design
When one AHU-KIT is connected to one AHU, the piping diagram is as follows:
When several AHU-KITs are connected to one AHU, the piping diagram is as follows:
3.5.2.1 Selection of Branch Pipe
(1) Branch pipes (a, b) between outdoor units shall be selected according to the total capacity
of outdoor unit ,as follows:
Selection of branch pipe between ODU modules
(2) Branch pipe (c, d) between indoor units shall be selected according to the total capacity of
downstream IDUs, as follows:
Fig.3.5.1 One AHU-KIT to one AHU
Fig.3.5.2 Several AHU-KITs to one AHU
—
15
AHU-KIT
Model
ML01/A
Advertisement
Table of Contents
