Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, adjust the
height of the anti-scalp rollers.
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Adjust the anti-scalp rollers as shown in
34,
Figure
35, and
Figure 34
1. Anti-scalp roller
2. Spacer
3. Bushing
Figure 35
1. Anti-scalp roller
2. Bushing
Figure
Figure
36.
4. Flange nut
5. Bolt
3. Flange nut
4. Bolt
1. Anti-scalp roller
2. Spacer
3. Bushing
g029955
g029956
30
Figure 36
4. Flange nut
5. Bolt
g029957