Table of Contents
Advertisement
6.
Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
51).
7.
Start the engine and drive to a flat area.
8.
Check the oil level again.
Changing the Engine-Oil Filter
1.
Drain the oil from the engine; refer to
the Engine Oil (page
2.
Change the engine-oil filter
Figure 51
Changing
43).
(Figure
52).
(Figure
g194610
Note:
the engine, and then turn the oil filter an extra
3/4 turn.
3.
Fill the crankcase with the proper type of new
oil; refer to
44
Figure 52
Ensure that the oil-filter gasket touches
Engine-Oil Specifications (page
g036856
g027477
42).
Advertisement
Table of Contents
